My Site Preloader
menu

4th Gen 4Runner / Hilux Surf Low Profile Rear Bumper Kit

Toyota 4Runner

2003-2009

Toyota Toyota 4Runner CO0629

ID product: 1638

AUD$ 1,023.48

Choose
your variation

  • Body Lift Adjustment (NOT suspension lift)
      Choose an option
    • 1" Body Lift

      The 1" body lift option is only for if you have a 1" body lift installed on your vehicle. If you have any type of suspension lift (coilovers, new shocks and coils, spacer lifts, leveling kits, etc) you will want to select the "no body lift" option.

      Price: + AUD$ 38.64

    • 2" Body Lift

      The 2" body lift option is only for if you have a 2" body lift installed on your vehicle. If you have any type of suspension lift (coilovers, new shocks and coils, spacer lifts, leveling kits, etc) you will want to select the "no body lift" option.

      Price: + AUD$ 78.49

    • 3" Body Lift

      The 3" body lift option is only for if you have a 3" body lift installed on your vehicle. If you have any type of suspension lift (coilovers, new shocks and coils, spacer lifts, leveling kits, etc) you will want to select the "no body lift" option.

      Price: + AUD$ 102.64

  • Cree LED Lights
      Choose an option
    • Two 24W Cree LED Pod Lights

      Includes two 24W 2300 Lumen CREE LED Lights with a spot/flood combo beam pattern and great adjustability. Simply splice them into your existing factory fog light wiring for an easy install that keeps your factory fog light switch

      Price: + AUD$ 106.26

    • Two 40W Cree LED Pod Lights

      Includes two 40W 3800 Lumen CREE LED Lights with a spot beam pattern and great adjustability. Simply splice them into your existing factory fog light wiring for an easy install that keeps your factory fog light switch

      Price: + AUD$ 143.69

    • Two 24W Cree LED Pod Lights with Full Wiring Harness and Switch

      Includes two 24W 2300 Lumen CREE LED Lights with a spot/flood combo beam pattern and great adjustability. Includes full wiring harness with switch, relay and industry-standard DT connectors

      Price: + AUD$ 150.94

    • Two 40W Cree LED Pod Lights with Full Wiring Harness and Switch

      Includes two 40W 3800 Lumen CREE LED Lights with a spot beam pattern and great adjustability. Includes full wiring harness with switch, relay and industry-standard DT connectors

      Price: + AUD$ 190.79

  • Material
      Choose an option
    • Steel

      Our steel bumpers are constructed out of 3/16” thick P&O hot rolled steel, NOT cheaper mild steel. Compared to aluminum, steel provides high strength and durability and is easier to weld. It also comes in at a pricepoint much lower than aluminum

      Price: + AUD$ 0.00

    • Aluminum

      Our aluminum bumpers are constructed out of ¼” thick 5052 aluminum. Aluminum provides great corrosion resistance and substantial weight savings over steel. While it is still very strong and durable, it will sustain dents and scratches easier than steel if you like to play hard in the rocks

      Price: + AUD$ 1,261.84

  • Swing Out Carrier
      Choose an option
    • Dual Swing Out Carrier with Dual Gas Can Holder

      This option gives you two swing arms with space to mount a full size spare tire, hilift jack, and two 20L NATO gas cans. The gas can holder is lockable and is included with this option. The swing out arms use a 2/3 – 1/3 split to maximize gear-mounting options. Please see our "Rear Swing Out" FAQ section for more details on our Swing Out product options.

      Price: + AUD$ 1,334.29

    • Single Swing Out Carrier

      This option gives you a single swing arm with space to mount a full size spare tire and tabs suitable for mounting a hilift jack and other recovery gear. This swing arm spans roughly 2/3 of the width of the rear hatch/ tailgate. This option does not include our dual gas can holder.

      Price: + AUD$ 784.88

  • Bolt-On Hitch Receiver
      Choose an option
    • No

      "If you select this option, your bumper will not come with any hitch receiver. However, most of our bumpers are designed with flat bottoms to maintain compatibility with the factory hitch receiver (please confirm with us for your specific vehicle model) "

      Price: + AUD$ 0.00

    • Yes

      Adds a removable bolt-on 2” hitch receiver (shackle not included). All of our receivers are designed to provide maximum strength and ground clearance. However, since the welding process is out of our hands, these hitch receivers are not rated for on-road towing. They are only intended for hitch mounted accessories such as bicycle racks and for off-road use as a recovery point

      Price: + AUD$ 78.49

  • 3/4" Recovery Shackle (Pair)
      Choose an option
    • No

      Omits the pair of 3/4" recovery shackles. Your bumper will still come with built in attachment points for the recovery shackles of your choice.

      Price: + AUD$ 0.00

    • Yes

      Adds a pair of 3/4" Recovery shackles. These shackles have a 7/8" diameter pin, black powder coat finish, and rubber isolators to eliminate noise and protect your other recovery equipment

      Price: + AUD$ 47.09

AUD$ 1,023.48 AUD$ 1,023.48 1023.48 AUD

CAD$ 847.60

Add to Cart
"4th Gen 4Runner / Hilux Surf Low Profile Rear Bumper Kit" has been added to your cart.
description

This is a high clearance DIY weld-together bumper kit for the 4th generation (2003-2009) Toyota 4Runner. With the 4th gen 4Runner, Toyota left a lot to be desired when it comes to fitting a clean, high clearance rear bumper. The stock bumper extends way up the sides of the body and there is a bulky frame crossmember located behind the rear lift gate. Both of these factors make it very difficult to maximize ground clearance and maintain a low bumper profile. After many design iterations, we settled on a bumper that leaves your frame crossmember fully intact and keeps the top 6" of the stock plastic bumper valence. By doing this, we feel that we have achieved a very tidy bumper profile that will complement the lines of your 4Runner. This also means that no frame modification of any kind is required. This bumper allows you to forget about departure angle and substantially improves the offroad capability of your 4th gen 4Runner. It offers excellent protection from trail obstacles and distracted drivers alike and has been kept to a weight of 130lbs through careful design work.


The profile of this bumper has been designed with maximum ground clearance and departure angles put first. The bumper sits as high and tight to the rear frame crossmember of the 4th generation (2003-2009) Toyota 4Runner as possible, while the angled side wing faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper provide un-interrupted plate protection that wraps underneath the vehicle and into the vehicle frame. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that many Toyota 4Runner owners want to run oversized tires, which often create interference and rubbing issues with the stock bumper. We have thought ahead and specifically designed these bumper side wings to clear 35" tires.

The main section of this bumper is CNC-bent out of a single piece of  3/16" P&O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.

We finished this bumper off with optional single and dual swing out carriers, a high clearance hitch receiver, LED pod lights (custom cut outs available by request), and heavy duty 9/16" recovery points that are placed directly in line with the Toyota 4Runner frame to eliminate any leveraging effects. These recovery points are formed out of laser cut steel plates that pass through the bumper shell and tie directly into the bumper's main mounting points on the 4th gen 4Runner frame. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your 4th gen 4Runner frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 130lbs for the steel bumper and 64lbs for the aluminum version. Considering that this bumper replaces your factory bumper, hitch receiver and associated components, the resulting weight increase to your 4th gen 4Runner is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.

The swing out tire carrier comes in either a single or dual sided configuration and is built to accept a tire up to 37" in diameter! Both carriers include mounting brackets for a hilift jack and other recovery items. The dual swing out includes the hilift mount as well as a lockable jerry can holder designed to fit two 20L NATO style jerry cans. These carriers feature heavy duty chromoly heim joint hinges, 2000lb toggle latches, T-handle spring pins, and a replaceable UHMW catch pad that provides secure, rattle free operation. The heim joints in conjunction with the toggle latch provide tons of adjustability, allowing for easy assembly and guaranteed alignment of the carrier latch. The single swing out add-on weighs 34lbs and the dual swing out add-on with gas can holder weighs 77lbs.

  • DIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included)

  • CNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product

  • Slim profile is engineered to provide maximum ground clearance and complement the factory body lines - trimming of stock plastic bumper required

  • Heavy duty 3/16" plate steel construction for maximum offroad strength and durability

  • Optional 1/4" 5052 aluminum construction for a lightweight yet very durable overlanding setup (66lb weight savings)

  • Optional 2" hitch receiver is tapered for a clean look and further clearance gains (While the hitch is very well reinforced, we cannot rate it for on-road towing due to the DIY welding nature of this kit)

  • Mounts directly to frame using 14 factory mounting points - no drilling required.

  • Reinforced 9/16" thick clevis mounts allow the use of 3/4" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles

  • All kits ship as clean, bare metal that is ready to weld out of the box - the Nitrogen laser cutting technology means no cutting edge oxidation and thus easier and stronger welds

  • Optional Single and Dual Swing out carriers with spare tire mount, hilift jack mount and locking dual NATO can holder (dual swing out only)


LED Light Option: The updated version of this bumper is sleeker and lower profile at the corners and can no longer fit the optional lights inside the bumper. Instead, the LED light option includes adjustable CNC laser cut tabs to mount the lights either on the swing outs or on top of the bumper.

Read more
additionnal information
Body Lift Adjustment (NOT suspension lift)
None | 1" Body Lift | 2" Body Lift | 3" Body Lift
Cree LED Lights
None | Two 24W Cree LED Pod Lights | Two 40W Cree LED Pod Lights | Two 24W Cree LED Pod Lights with Full Wiring Harness and Switch | Two 40W Cree LED Pod Lights with Full Wiring Harness and Switch
Material
Aluminum (+1045) | Steel
Swing Out Carrier
Dual Swing Out Carrier with Dual Gas Can Holder | None | Single Swing Out Carrier
Bolt-On Hitch Receiver
No | Yes
3/4" Recovery Shackle (Pair)
No | Yes
bumper weight

Steel base bumper weight: 130lbs

Aluminum base bumper weight: 64 lbs

Wondering what is involved in assembling and welding this bumper kit?

Watch the video below to see 4th Gen 4Runner Owner Garrett Logan run through the process and gives his thoughts along the way. (The 4th gen 4runner is shown, but the build process is nearly identical to this bumper)
  • User Review David Beaudet

    Purchased a high clearance bumper kit for my son’s 2nd generation Tacoma. He had almost zero welding experience and thought this would be a great cras...

  • User Review Phillip Miller (ZomBud)

    Fantastic bumper, even for a novice welder. I really liked how all the pieces just fit together, and the locating tabs were also a big help. The one i...

  • User Review Gerry B

    The small shop that can AND DOES!!! A project type that always has challenges and no surprise I did. Bandon and the Coastal Offroad team were extrem...

  • User Review Eric T

    This company is top notch! They were fast and communicated throughout the whole process. The kit was perfect too… very happy with whole package and it...

  • User Profil David Beaudet

    Purchased a high clearance bumper kit for my son’s 2nd generation Tacoma. He had almost zero welding experience and thought this would be a great cras...

  • User Profil Phillip Miller (ZomBud)

    Fantastic bumper, even for a novice welder. I really liked how all the pieces just fit together, and the locating tabs were also a big help. The one i...

  • User Profil Gerry B

    The small shop that can AND DOES!!! A project type that always has challenges and no surprise I did. Bandon and the Coastal Offroad team were extrem...

  • User Profil Eric T

    This company is top notch! They were fast and communicated throughout the whole process. The kit was perfect too… very happy with whole package and it...

you may

also like

Toyota 4Runner

4th Gen 4Runner / FJ Cruiser/ Land Cruiser Prado 120 / Lexus GX470 Skid Plate Kit

AUD$ 793.03

see more

Toyota 4Runner

4th Gen 4Runner / Hilux Surf High Clearance Front Bumper Kit

AUD$ 993.72

see more

Toyota 4Runner

Kickout Rock Slider Weld-Together Kit

AUD$ 801.35

see more

Universal Products

Swing Out Carrier Systems

AUD$ 779.21

see more

Toyota 4Runner

4th Gen 4Runner / FJ Cruiser/ Land Cruiser Prado 120 / Lexus GX470 Skid Plate Kit

AUD$ 793.03

see more

Toyota 4Runner

4th Gen 4Runner / Hilux Surf High Clearance Front Bumper Kit

AUD$ 993.72

see more

Toyota 4Runner

Kickout Rock Slider Weld-Together Kit

AUD$ 801.35

see more

Universal Products

Swing Out Carrier Systems

AUD$ 779.21

see more